|
DOWNLOAD
Please make sure you
select the appropriate software for your receiver's model. If
you install the wrong software into your receiver, it will become
inoperable and it will not be covered under warranty. The
software is also specific to the model number.
To download software or
communicate with your receiver, you will need a 9 pin female to 9
pin female null modem cable. Some times it is referred to as Cross
Over cable, or File Transfer cable. Make absolutely sure that you
purchase a NULL MODEM and not straight through cable.
connect the null modem cable to your
comport on your computer and the back of your receiver. For
most computers, the comport on your computer will be COM1. If it is
not COM1, please select the appropriate COM port in the software you
are using to communicate between your computer and the receiver such
as the loader software or the editor software.
|