|
DOWNLOAD
Nfusion
You will need Null Modem
Cable
I. Downloading the Main software.
1. Turn the receiver off and connect the cable to the computer
2. Run SuperStar software loader
4. Click on the OPEN icon
5. Select new software file (new bin file)
6. Click on Start Nfusion
7. You will see a message "Reboot your receiver". Click OK.
8. Turn the receiver ON. You should see a progress bar.
Wait until the software is loaded
completely. You should see the text UPGRA then GOOD on the front panel
and the receiver may reboot and show 0000. If the text
shows FAIL then you downloaded the wrong software or your
mother board is not compatible with the new software.
|
II. Loading the Boot file
- Run the SuperStar loader program
- Click on MAIN button to switch it
to BOOT
- Click on OPEN and select the boot
file you wish to download
- click on Start Nfusion
- Turn the receiver's power switch
ON
- You will see a progress bar, then
you will see UPGRA then GOOD on the front panel
|
|
|
| General Information:
To access the extended program guide, press GUIDE then the
LANG key.
Wait for a few minutes for the extended guide to load.
To access the THEME menu, while watching a channel press the double
up arrow key (Fast forward)
|
|
How To Instructions
|
|
Quick Reference Guide
Nfusion_Step_by_Step_for_Newbies.pdf
Quick Reference Guide |
|
Wireless Setup
NetGear-Linksys Wireless Step-by-Step config.pdf
|